Sweatshirt
BLAZE GARMENTS
Sweatshirt β Technical Pack
Men's crew-neck sweatshirt, brushed fleece, ribbed collar, cuffs and hem, set-in sleeves.
Style No.BLZ-SW-001
FabricCotton/polyester fleece, 280β320 g/mΒ²
ColourwaysGrey, Navy, Black, Maroon
Size rangeSmall β XXL
ManufacturerBlaze Garments
Versionv1.0 Β· Capability sample
Design Flats & Callouts β Front
- 1Ribbed crew collar β 1Γ1 rib knit, self-fabric, set flat with no roll or gaping.
- 2Chest logo β Embroidered logo, wearer's left chest, placement per spec.
- 3Set-in sleeve seam β 4-thread overlock, seam pressed toward body, no puckering.
- 4Cuffs β 1Γ1 rib knit, finished relaxed, sleeve gathered evenly into cuff.
- 5Hem rib β 1Γ1 rib knit band, body sits flush β no cinching or waviness.
Design Flats & Callouts β Back
- 1Back yoke seam β Single needle lockstitch, seam pressed open, no visible puckering.
Measurement Diagram & Spec Table
| Code | Point of measure | How to measure | Small | Medium | Large | XL | XXL |
|---|---|---|---|---|---|---|---|
| A | Body length | HPS straight down to hem edge | 65 cm | 67 cm | 69 cm | 71 cm | 73 cm |
| B | Β½ Chest | Straight across, 2.5cm below armhole | 53 cm | 57 cm | 61 cm | 65 cm | 69 cm |
| C | Β½ Sweep | Straight across hem, relaxed | 51 cm | 55 cm | 59 cm | 63 cm | 67 cm |
| D | Shoulder width | Seam to seam, across back | 45 cm | 47 cm | 49 cm | 51 cm | 53 cm |
| E | Sleeve length | Shoulder point to cuff edge | 59 cm | 61 cm | 63 cm | 65 cm | 67 cm |
| F | Β½ Bicep | 2.5cm below armhole, straight across | 19 cm | 20 cm | 21 cm | 22 cm | 23 cm |
| G | Cuff width | Across rib, relaxed | 8.5 cm | 9 cm | 9.5 cm | 10 cm | 10.5 cm |
| H | Neck width | Seam to seam, straight across | 17.5 cm | 18 cm | 18.5 cm | 19 cm | 19.5 cm |
All measurements in centimetres, garment laid flat, unstretched. Illustrative sample spec β final grading confirmed after proto approval.
Construction Sequence
| # | Operation | Machine / Stitch | Seam / Detail | Quality Point |
|---|---|---|---|---|
| 1 | Join shoulders | 4-thread overlock | 1cm seam allowance, press to back | Shoulders aligned, no stretch |
| 2 | Attach ribbed collar | Overlock + coverstitch | Collar stretched evenly onto neckline | Collar sits flat, no roll or gape |
| 3 | Attach sleeves (set-in) | Overlock + coverstitch | Sleeve eased evenly into armhole | No puckering, armhole smooth |
| 4 | Close side seams | 4-thread overlock | 1cm seam allowance, underarm reinforced | Seam flat, no twisting |
| 5 | Attach cuffs | Overlock + coverstitch | 1Γ1 rib, sleeve gathered evenly | Cuffs even both sides |
| 6 | Attach hem rib | Overlock + coverstitch | 1Γ1 rib band, body sits flush | Hem level, no waviness |
| 7 | Main label + size tab | Lockstitch | CB neck, 4 sides, DTM thread | Straight, centred |
Want this built to your own specifications?
This is how every Blaze Garments private-label project starts β a tech pack this detailed, built for your design before a single piece is cut.
Start Your Private Label Project